|
Hot and Cold Water in a Mobile, Vehicle Hand Wash Station (Waste Catch Now Available)
| New Handwashing System for Auto, Truck or Van |
|
$425.00
|
Handiwash 12V Mobile Automotive and Vehicle Handwash System
Handiwash (tm)12 Volt Mobile Automotive and Vehicle Handwash System (Mounting Bracket Included) with Hot and Cold Water Spigots
New in the safety equipment marketplace, there is now a portable handwash station for the automobile, truck or van.
This innovative unit now offers
an affordable, mobile handwashing solution with state of the art electronics.
The water
element in the included heater thermostatically controls water temperature to 120 degrees
Fahrenheit to prevent scalding.
Molded from super tough, UV resistant polymers suitable for internal and
external applications, and including dual water hot and cold spigots, this handwash station acts and feels similar to the handwashing sink you normally use
for hand washing. With easy installation and instructions included, the
Handiwash (tm) system can be easily mounted to any vertical surface that
provides enough clearance (see below specifications) and is normally wired to a 12 volt
source. The Handiwash (tm) is also CSA* Certified. Now with the SEC 1223 DC Switching Power Supply Accessory and supplied custom power leads, you
can hook up to a 110v power outlet.
Warranty Information for this item: The
Handiwash unit carries a 12 month warranty from date of purchase covering
defective parts and workmanship.
**PLEASE NOTE:
Government pricing available for hand wash stations and products.
Municipalities, county agencies, schools, hospitals, non-profit agencies, and distributors/resellers may
also be eligible for discount pricing. Please visit
http://www.portahandwash.com. **Certain state taxes may apply in some
instances.
*CSA Certification for the Handiwash (tm) does
not pass along to the SEC 1223 unit when used with the Handiwash (tm) unit.
The SEC 1223 unit is a separate accessory and is UL listed separately.
Incorrect wiring and or non-standard use of either device results in voidance of
warranty from either manufacturer and also may result in injury.
Great for agricultural, catering, farming, utility
companies (water, sewage, treatment facilities) and even camping applications.
Now, you can enjoy hot and cold water just about anywhere.
Mounting Bracket Included (Click on Link Below
for Mounting and Technical Instructions)
Double-Click to Open or
Right Mouse Click Here to Save Parts List and Instructions for Handiwash (tm) in
PDF format
A HELPFUL CHART IS PROVIDED BELOW TO HELP YOU DECIDE
WHICH PARTS AND ACCESSORIES TO ORDER WITH THE HANDIWASH UNIT
*NOTE: If applicable, please
check first with your local health department or regulatory agency first to
ensure your chosen configuration meets their requirements.
| Part Number |
Description |
Comments / Environment for Handiwash* |
Choose This Configuration With Included Accessories* |
| Handiwash |
12 Volt Handiwash Basic System with no accessories, includes
mounting brackets for vehicle/wall and flexible hose for diverting water to
a nearby drain. No waste catch included. |
Used in a service truck or vehicle when
needed to wire to
the vehicle 12 volt Battery. A wiring diagram is provided with
instructions to configure unit to only run while vehicle is
running. See .PDF Instructions Above. *See NOTE Above. |
Handiwash Basic (No Accessories) |
| Handiwash-SEC 1223 |
Includes 12 Volt Handiwash Basic System Above plus
a DC switching power supply. No waste catch included. |
Used when needed to run
Handiwash from a 110 volt electrical outlet. Customer hooks up drain
hose to their own waste storage. *See NOTE Above. |
HW&SEC1223 Power Supply with
Leads |
| Handiwash-BTB |
Includes 12 Volt Handiwash Basic
System Above plus a 2.5 gallon HDPE jug, a 1 foot section of hose, a drain
cap and a single bar mounting bracket for securing the waste tank at floor
level. |
Used in a setting where customer
needs a 12 Volt Handiwash and a mounted self-contained waste storage
container at floor level. *See NOTE Above. |
HW&Floor Waste Catch |
| Handiwash-ETB |
Includes 12 Volt Handiwash Basic
System Above plus a 2.5 gallon HDPE jug, a 1 foot section of hose, a drain
cap and a basket type mounting bracket for securing the waste tank at an
suspended level. |
Used in a setting where customer
needs a 12 Volt Handiwash and a mounted self-contained waste storage
container at an elevated level. *See NOTE Above. |
HW&Suspended Waste Catch |
| Handiwash-5GALWC |
Includes 12 Volt Handiwash Basic
System Above plus a 5 Gal. HDPE vented Jug, 2 foot section of hose and drain
cap. No mounting bracket for waste jug. |
Used in a food or waste
environment where a larger capacity vented waste storage container is
required and will be hooked directly to a 12 volt battery.
*See NOTE Above. |
HW&5 Gal Waste Catch (No
Bracket) |
| Handiwash-ALL |
Includes a 12 Volt Handwash
Basic System, plus a SEC 1223 DC Switching Power Supply and customer's
choice of waste catch unit described above. |
Best deal. Used in a variety of
settings to include food carts, daycare centers, medical offices, etc. where
you have a 110 volt electrical outlet and the need for self-contained waste
storage. *See NOTE Above. |
HW,SEC1223&Waste Catch |
WORRIED ABOUT GRAY WATER WASTE IN YOUR VEHICLE?
A WASTE CATCH ACCESSORY IS NOW AVAILABLE!
Pictured below is our new suspended tank waste catch (pictured below) or a floor
tank waste catch (not pictured). The suspended tank waste catch with the
basket design bracket allows you to mount the waste tank at an elevated height.
Included is a 12" length heavy duty vinyl hose, an HDPE waste container 2.5
gallons, a heavy duty mounting bracket, and a specially fitted drain cap for the
waste cap. The floor tank waste catch is a single horizontal bar that secures
the waste tank at floor level.
WILL YOU USING THE HANDIWASH UNIT WITHIN A
FOOD OR CATERING ENVIRONMENT?
Due to a requirement from most health organizations and FDA requirements for a
waste storage container (not pictured) that exceeds the fresh water capacity (1.5 times the
fresh water capacity), we've recently added a waste storage container (5 Gallon
Jug, High Density Polyethylene (HDPE) with 18 mm vent. It includes a 2 foot
length heavy duty vinyl hose and physical dimensions measure 11"L x 10"W x 14"H. No mounting bracket
available for the 5 gallon waste tank model. Note: When attempting
to meet compliance requirements, All Safety Products, Inc. highly recommends
that you consult with your regulatory agency before purchasing the Handiwash unit
and any accessories.
NEED TO HOOK UP TO 110V OUTLET?
AN OPTIONAL DC POWER SWITCHING SUPPLY
WITH CUSTOM POWER LEADS IS NOW AVAILABLE. The Samlex SEC-1223 12V DC
switching power supply delivers 23A continuous, 25A intermittent at 13.8 volts.
Equipped with advanced switch-mode technology. Reliable power with minimum
weight and size. Circuit innovations minimize output voltage ripple. UL listed to both USA & Canadian safety
standards. Complies with FCC Part 15. Class B standards It also carries a 3 year
limited warranty . We include a set of power leads for safe connection. It
is strongly advised that you only use this
 tested
power supply and leads when hooking up the Handiwash (tm) unit to a 110v power
outlet.
Right
Mouse Click Here for 110V Power Supply Wiring to Handiwash (tm) in PDF format
|
Model Number |
SEC-1223 |
|
Input Voltage |
100-130 or 200-260VAC |
|
Output Voltage |
13.8 VDC |
Output Current
Continuous
Maximum |
23 Amps
25 Amps |
Dimensions
H' x W' x D' |
2.4 x 7.3 x 8.7 |
|
Fuse Rating |
6.3 A |
|
Shipping Weight Lbs. |
3.5 |
Contact us for additional product
information by using the E-mail form on our front page under Customer Service or
click here,
Inquiry Response Form or call our Toll Free Number: 877-208-3109.
A flat shipping rate of 15.00 for the
Handiwash Unit is applied for ground shipping within the 48 contiguous states.
The waste catch and or accessories
will be shipped separately. For Alaska and
Hawaii or other shipping methods, we will need to adjust shipping rate.
|